English Chinese (Simplified) French German Italian Portuguese Russian Spanish
15. 12. 02
posted by: Super User
Hits: 79581

Email Natures Energies Health Products

If your email is a general question related to a specific topic or a product that we sell, please leave your inquiry in the comments section at the bottom of the appropriate page for public viewing. Your inquiry and our reply will then help the many other people that visit the Natures Energies web site.

Otherwise, if you feel the inquiry is not for public viewing, please complete the following form to send an email message to us. We will reply to your email message within 24 hours of receiving the message that you send.

{loadformmaker 1}

Add a comment
15. 12. 02
posted by: Super User
Hits: 19198

Hypertronic Pro Warranty

Natures Energies Health Products warrants to the original consumer/purchaser (herein after called "the owner") that the Hypertronic Pro (herein after called "the product") shall be free from faults, as well as defects in material and workmanship for a period of twelve (12) months from the date of the original purchase subject to the conditions stated herein.

If service is required during the warranty period.

Where service is required during the warranty period, these repairs would be carried out with no charge to the owner, subject to the conditions specified herein.

If up until 72 hours after receiving the product, there is failure in the product, then the manufacturer is responsible for any transportation and insurance costs to and from our contracted engineer in U.S.A should the product require being repaired. The manufacturer has liability for any freight or transportation damage during transit in these circumstances.

After 72 hours of receiving the product the owner is responsible for any transportation and insurance costs to and from our contracted engineer in U.S.A, should the product need to be repaired. The owner in these circumstances has liability for any freight or transportation damage during transit.

Should our contracted engineer in USA determine that the product is not faulty, or that damage is outside warranty conditions (See When this warranty does not apply below), then the owner is responsible for the cost of having the product returned to them, and no costs for transport (as is the case for failure within 72 hours) will be paid to the owner. In these circumstances, the assessment made by our contracted engineer is final. The owner may request in this case for repairs to proceed, but is responsible for labour and part costs, as well as transportation and insurance.

If after the 12 month warranty period has expired repairs are required, costs for labour and parts will be charged to repair the product.

When this warranty does not apply

This warranty does not extend to accessories or defects or injuries caused by or resulting from causes not attributable to faulty parts or manufacture of the product, including but not limited to, defect or injury caused by or resulting from misuse, abuse, neglect, accidental damage, improper voltage, liquid spillage, or vermin infestation.

The warranty also does not apply where audio hardware with output exceeding 1V RMS has been connected to the audio input of the product, resulting in damage. Generally hardware with audio output for headphones has standard level audio output which is 1V RMS output, but it is up to the owner to check with manufacturer specifications before connecting to the product.

Consumer Protection Laws

This Warranty is in addition to and does not in any way affect your rights under the Trade Practices Act 1974 (Australia). For owners who are covered by consumer protection laws or regulations in their country of purchase or, if different, their country of residence, the benefits conferred by this warranty are in addition to all rights and remedies conveyed by such consumer protection laws and regulations. 

Some countries, states and provinces do not allow the exclusion or limitation of incidental or consequential damages or exclusions or limitations on the duration of implied warranties or conditions, so the above limitations or exclusions may not apply to you. This warranty gives you specific legal rights, and you may also have other rights that vary by country, state or province.

This Limited Warranty is governed by and construed under the laws of the country in which the product purchase took place. Apple, the warrantor under this Limited Warranty, is identified at the end of this document according to the country or region in which the product purchase took place.

Note: Please retain your purchase invoice, as this should be produced to validate your warranty claim.

Initiating Your Warranty Claim

Click here to email Natures Energies to initiate your claim. Ensure that you leave the following details when you email us;

  • Your Name
  • Your Date of Purchase
  • Your Invoice Number
  • Your Address
  • A Detailed Description of the Problem
Add a comment
15. 11. 26
posted by: Super User
Hits: 26011

Using the Sense Stick Pad

senseThe sense stick pad is an integral part of the Hypertronic Pro and it is used to harness will power of the user to the targeted witness (which could be a strand of hair, a photo etc which is on the witness plate). It can be used by advanced radionics therapists, or by those wishing to use their psyche as part of the remedy which they are creating. It is particularly useful in psychotronics. If you prefer not to include the Sense option in your work, simply leave the 2 knobs set at zero.

The stick pad is an optional tool for connecting operator mind and for tuning thoughts with reality for finer radionic adjustment. By gently stroking the surface of the small plate with a finger(s) (usually in direction towards the user) a change in the energy level can be felt on finger tips with a sticking effect. The 2 knobs are adjusted accordingly to fine tune the broadcast plate with intention and manifestation when needed.

Start with the 2 knobs set at zero. Focus your mind on the point that you are trying to will, and begin to turn the left knob clockwise. When you get the sticking effect, leave the knob in that position, then repeat the procedure on the right knob. You will then have 2 knobs at 2 different positions, containing the thought or manifestation being included in the broadcast or remedy. You are then ready to energize.

warningWarning. Always make sure that you have permission of the patient if adding your will power for a broadcast, which otherwise subjects you to the laws of Karma.



Many people are confused by this divination method.

The stick pad within the Hypertronic Pro is a copper plate linked directly to the core of the manifest generator and the rate circuit. On top of this copper plate is a thin polymer layer.

While the stick pad primarily relies on the ideomotor response of the operator there may be a few more subtle energies involved in actually getting the stick. Ministry of defence research suggests that the low frequency natural electric fields, or static as it is commonly known is a manifestation in some degree of the fundamental energy of the universe termed orgone or chi.

When you use a stick pad which has a layer of plastic over the copper plate you are able to create a small amount of static by the rubbing process. It is within some of this static that the orgone energy resides, which can act as a carrier for intention and the radionics signals being output from the Hypertronic Pro.

It is a combination of these factors which make the stick pad a formidable dowsing device. It is also the cause of why many people find the stick pad difficult to get used to and opt instead for a standard pendulum. Because the stick pad is producing a combination of energies an experienced pendulum dowser will have trouble overriding their natural ideomotor response to a pendulum. This act is not conscious but resides within the subconscious.

The key to using a stick pad is to let all preconceptions fly out of the window and trust the reactions you are getting from the rubbing plate.

The reaction or stick manifests uniquely for each and everyone of us. For some it will appear as if their finger is getting heavier, for others it will manifest as sticky finger and your finger will be pulled due to friction.

Having just mentioned fingers, it is worth noting that no specific finger or thumb is recommended over the others, just use which ever you feel comfortable with.

It really is worth giving the stick pad a go. If at first you don’t succeed then keep on trying.

Add a comment
15. 12. 01
posted by: Super User
Hits: 14231

Hypertronic Pro Frequently Asked Questions (FAQ)

1. What are the dimensions and weight of the Hypertronic Pro?

The Hypertronic Pro weighs 3Kg, and measures 31 x 24 x 14 cm in size.

2. If any hardware issues arise with the Hypertronic Pro, do we have to revert back to you for getting them repaired?

The Hypertronic Pro has a one year Warranty. Any hardware issues that might arise in the future, you can refer the unit to us and we will send instructions on where to send for repair. This is very unlikely however as each unit is extensively tested, and uses superior electronic parts.

3. Is the Hypertronic Pro a Base 10, 44 or 336 model?

It is base 10, because of the 10-digit dials. I have seen where people enter either a mathematical division of base 44 / base 10, or enter the 2-digit rate for a base 44. A dial works by itself, as it could turn 0-10 just as it could turn 0-44. The 10-digit dials would take (2) digits for a base 44 rate. i.e.: 27, 45, 33 in base 44 could be done on (3) dials, but need (6) 10-digit dials to spell out 274533.

4. Can we use the Life Frequencies Essentials Software with the Hypertronic Pro?

Yes you can. The recommended software is Rife Pro X2, but you can use the advanced version of this, which is Life Frequencies Essentials. Both of these software are compatible with Hypertronic Pro.

5. Is there a way to check the intensity of a rate or a focused thot on the Hypertronic Pro?

On some of the KRT machines there is an Intensity dial. It is used during sticking, and they have a manual somewhere about progressing through a session, "removing a blockage", and setting the intensity again in the session as it moves along. In a similar way, the Sense knobs on the HTP represent that. The left Sense knob is more of a strong sensation (larger strength), representative of the Tens digit; the right Sense knob is a finer sensation, representative of the Ones digit.

6. Is the Hypertronic Pro able to broadcast complex homeopathic remedies (comprised of several different substances) in the one broadcast?

Yes this is achievable with the Hypertronic Pro. Users would typically add rates to their carrier substance, creating multiple rates in one item. Then, they would use that in their broadcast. The success rate of this depends upon the skill of the user, as to how well the multiple rates imprint into their carrier. Even though it is expected to be simple plug-and-play, intent still plays a role, and the stress of a user under more demanding protocols comes in to play, as well. We have observed this as feedback from this field, in general, not just for the Hypertronic Pro but from other competitive radionics units as well.

The Hypertronic Pro also has the external plate input, so multiple plates could be utilized (in addition to the standard IN plate), with each having an imprinted carrier substance. This way, multiple substances could spread the rates amongst each other, instead of only one being critical to success.

7. I am being attacked by someone radionically. Is the Hypertronic Pro able to counteract the attack?

Yes. You will be able to counter the attack and neutralise frequencies by using the Mirror function on the Hypertronic Pro. The Hypertronic Pro can collect all frequencies from the witness and is not restricted in frequencies. Once the witness is collected, it can easily make an inverse remedy through the mirror control which would neutralise attack frequencies. Alternatively you can use the continuous broadcast to electronically neutralise the attack. Note that if you are trying to locate the exact frequencies with equipment you already have its only guess work unless you know exactly whats being thrown at you. Hypertronic Pro will read them and invert them through mirror with no limitation.

Also, an important part is to stay healthy and hydrated. Just as an ill person cannot fight off a virus, an ill person cannot fight off things besides virii. Radionics attacks work well on those who are not as healthy as they could be.

8. Is the Hypertronic Pro CE Certified?

What is CE Certification?

The CE Marking on a product is a manufacturer's declaration that the product complies with the essential requirements of the relevant European health, safety and environmental protection legislation, in practice by many of the so-called Product Directives. Details of the legal requirements and specifications for the CE mark are specified in DIRECTIVE 2014/35/EU OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL.

Hypertronic Pro

The Hypertronic Pro includes a separate power supply that plugs into the unit. Being separate, it is not fixed to the unit itself.

Power Supply

The power supply has a 100-240V input and is therefore under the scrutiny of DIRECTIVE 2014/35/EU OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL. It has a CE mark as shown on the label on the underside of the power supply below;

CE Mark shown on label on Reverse Side of Power Supply Unit

It however is not fixed to the Hypertronic Pro. The electrical output from the power supply is a 12V/5A DC output. The Hypertronic Pro unit itself is therefore exempt from needing to be CE certified. Reasoning for this is Chapter 1, article 1 of DIRECTIVE 2014/35/EU OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL states that "This Directive shall apply to electrical equipment designed for use with a voltage rating of between 50 and 1 000 V for alternating current and between 75 and 1 500 V for direct current, other than the equipment and phenomena listed in Annex II." 


  • Electrical equipment for use in an explosive atmosphere
  • Electrical equipment for radiology and medical purposes
  • Electrical parts for goods and passenger lifts
  • Electricity meters
  • Plugs and socket outlets for domestic use
  • Electric fence controllers
  • Radio-electrical interference
  • Specialised electrical equipment, for use on ships, aircraft or railways, which complies with the safety provisions drawn up by international bodies in which the Member States participate.
  • Custom built evaluation kits destined for professionals to be used solely at research and development facilities for such purposes.

 The Hypertronic Pro unit falls outside of items listed in Annex II shown above and it therefore exempt from CE certification requirements.

9. When I use the continuous I don't see the LED light up. Is this correct? What should I observe to make sure the cycle is broadcasting?

There is no indicator light for Continuous mode. It will start the same as Transfer Only, with the IN LED lighting, then the OUT LED lighting, but instead of completing a cycle, and the OUT LED turning off, the OUT LED will stay on. It will stay on until the Energize button is pressed to end the transmission cycle.

10. How does the mirror function detect unwanted frequencies. How does it determine the frequencies to mirror and sort the good frequencies in a witness from the bad ones?

Mirror does not sort anything. Just as Direct does not sort anything.

Let's assume a pure sample. No extra ingredients, no fillers. Mirror would make the opposite - start with Thing A that causes a certain reaction, mirror it to prevent that certain reaction.

Nothing is absolutely pure, but the intention is there, so if a sample was air-borne contaminated with a fleck of dirty dust that we don't see, it would not affect the result. I suppose, technically, it would, but in the real world, our bodies ignore minor things.

Using a sample that consists of frequencies that both harm and heal, or contain both a vitamin and toxin: the "bad" (which depends upon the user's experiment) would not get sorted. That is why it is important to work in steps, with singular purposes, and build upon each one. Make a negative of a color image, and you see that the opposite (mirrored) colors are not sorted - all change together.

Many people view the electronic aspect as a waveform. Mirror would invert the waveform. One might say that the wave is still the same frequency (which it is), so how does that affect the cycle? It still goes up and down at the same rate. Noise-cancelling headphones mirror the signal from the outside world, and lay it on top of the original. The two are out-of-phase, and disappear.

11. I’m wondering if using the Hypertronic Pro and connecting both an extended witness and broadcast plate I could place multiple witnesses on the extended plate? ie) Can I put the photo of my witness on a USB stick and put the USB stick on the witness plate and say if I have 1000 photos of 1000 witnesses all on the USB if I can place the USB stick on the extended witness plate and successfully broadcast to all 1000 people on my USB stick using the Hypertronic Pro? I’m most excited to transmit audio, how many audios can I broadcast? Is there a way where I can broadcast multiple audios without needing to purchase a another whole machine?

Answer provided by our engineer "The plate that comes with the unit is 5"x8". As far as multiple witnesses, it seems to be common acceptance that the more complex the operation, the less likely the intended outcome. There is, of course, a variable based upon the type of machine and any energy amplifier included. A mass broadcast is more likely to succeed than a complicated trend/remedy input. There are some people who try to broadcast to the entire world, but I think there is too much complexity with involving 7 billion people.

As far as audio goes, the same situation would apply, as more information/complicated information packets could be interpreted the same way.

I made this capable of multiple inputs/outputs, so anything is possible. When it comes to multiple in/out, focus is really the key. Others seem to get better results building upon something, rather than combining as much as possible the first time.

To sum up: it seems a mass broadcast to multiple witnesses would be more successful than multiple trends to a witness. Digital files have been accepted as a form of trend/witness, from my experience."

12. Can I broadcast to a bottle of water? ie) broadcasting to the (glass) bottle of water as if the bottle of water was a witness? Also could I do this Via a photo of the glass bottle of water on a USB stick? What about via a physical photo of the bottle of water as photo-captured with a Polaroid camera?

Original is best, i.e.: water/object is in contact with device. Poloraid or other visual printout is next, followed by digital information.

13. Is Hypertronic Pro considered as a Malcolm Rae type radionic device? With Hypertronic Pro is it possible to make remedies with Base 336 rates and Base 44 rates also besides Base10 rates?

Many people use the Malcolm Rae cards with the radionics machines, by placing them on the plates.

Some people use the combination of digits with the thumb wheels. With (12) thumb wheels (at base 10), (4) 336 rates could be used or (6) 44 rates. It's just dividing the number of digits. There are some rates around the web where some have conversion rates or comparable rates, but many will dowse to determine the best way to enter those combinations.

14. Does the Hypertronic Pro use adjustable capacitors similar to those used in the original devices?

Almost all devices nowadays use resistance/variable resistance instead of variable capacitors (mainly due to cost/size/custom values). They function the same. The HTP does have certain capacitors in various locations in the circuitry to perform specific duties, but are not adjustable.

Add a comment
15. 11. 26
posted by: Super User
Hits: 11645

Cleaning and Caring for your Hypertronic Pro

KeysWhen the Hypertronic Pro is not in use, it is recommended that you keep the lid closed and locked. There are 2 keys provided with the Hypertronic Pro to lock the box. This ensures that no one but you can use the instrument, and it also ensures that the plates are kept clean from dust.

When using the Hypertronic Pro, it is essential to ensure that no fingerprints make their way onto the plates or onto any of the witness samples. If your fingerprints are there, then you will become part of the radionic circuit, and will receive targeted transmission of frequencies in a broadcast.

Hypertronic Pro Witness PlateCleaning the Plates on the Hypertronic Pro

If you accidentally touch the witness or broadcast plates, or if they need cleaning please use a clean damp cloth to wipe them over. Ensure that there are no fibers remaining on the plates after you have finished wiping. The plates are coated with a coat of lacquer to prevent oxidation, so it is important NOT to use any cleaning agents which could otherwise disturb the lacquer.

Extendable accessory plateCleaning the Extendable Accessory Plate

The Extendable Plate is made from an uncoated copper, and has a plastic lining on the back with plastic feet. Over time the copper surface may tend to tarnish. You can clean the accessory plate with alcohol such as methylated spirits (preferred as it will evaporate and leave no residue) or even acetone. Ensure that no residue remains on the plate which could otherwise affect readings or broadcasts.

It is recommended that you store the plate in the plastic bag in which it comes while it is not in use for maximum protection.

Copper hand pieceCleaning the Hand Held Copper Piece (Must always be cleaned between sessions)

It is important to clean the hand held copper piece every time after a patient has held it, as their fingerprints could create a targeted broadcast the next time another patient contacts the piece (i.e., the previous patient will receive a broadcast of the frequencies intended for the next patient without the unit being cleaned). The hand held copper piece can be cleaned in the same way that the accessory plate is cleaned. Alcohol such as methylated spirits is the preferred method.

It is recommended that you store the hand piece in a resealable plastic bag while it is not in use for maximum protection.

Add a comment